Jump to content
Московский Ветеринарный Форум
Sign in to follow this  
lovenova

How do you revive an old synthetic wig?

Recommended Posts

We guess you will throw them away probably. We are here to solve this problem. We'll show you how to revamp a pretty busted wig like this.

First of all, you need to place/put it on a 613 blonde wig head and pin her in place, and then brush it with a wide tooth hd lace frontal brush like this.

If you don't have a wide tooth brush, you can use either a paddle brush or a vent brush. A nice thing to use a mannequin head is that you can easily see what's going on in the back and check if it stays secured in order to pin it in place. You should start brushing it out from the ends of the lace front wigs cheap and continue working your way right on up.

https://m.yolissahair.com/media/catalog/product/b/o/body_wave_hd_lace_front_wigs_3.jpg

After brushing out, the ends are still pretty stiff down and the other parts are okay now. Then, the last thing you need to do is clean the wig.

The first is the friction. You can put hair care products like essential oil on the wig to reduce the damage due to the friction. But we don't really recommend putting a ton of products on synthetic wigs because it will be much stiffer over time and more prone to cause issues like this.

Clean the wig use a mild soap. Don't use the specialty shampoo or anything like that on a synthetic wig which the way that a lot of people talk about how you can condition synthetic wigs. However, it's probably focus on those cosplay cheap wigs.

Conditon the wig with lukewarm water. Put the wig in the water and and totally soak it. Once you've done that, take it and dry it a bit. Try not to pull forth your strength over it because you don't want to damage it. Work through the part line with fingers to make sure there's no makeup such as concealer, eye shadowon it . After you've done that, refill the sink with cool water and do all the steps again. Then put it on a towel.

Put the wet wig on a wig head and gently tease out the knots on the bottom portion with your fingers. Use a round brush to lightly brush the wig from its root to ends, and blow dry it by using medium to low heat.

If you don't have a medium setting on your dryer, put it on low because if you put it on high temperature, there's a chance that you will burn up the wig even if it's made of heat safe fiber.

Actually you don't need to blow this hair on every section. Try to work on small organized sections. Make sure to roll at the wrist and you will get a nice curl on the end. Heat it from different angles to ensure to get all the sides evenly warm and evenly dry.

Lastly, brush it again to see if there are any harder/wet areas on the ends. You need to apply a bit more heat on to silken the areas down a bit more.

Alright the wig is pretty much fixed and you get a new wig! Try out yourselves!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...